Collection: Products

"The Beast" Hydraulic Low Speed High Torque Orbital Motor 500cc/rev 38HP 10798 in-lbs torque 0-240rpm 0-32gpm

110/220VAC Hydraulic Power Unit 2hp 1-4 gpm 800-3000 psi 50 or 60Hz valves optional

110/220VAC Hydraulic Power Unit 2hp 1-4 gpm 800-3000 psi 50 or 60Hz valves optional (Assembly)

12 VDC Hydraulic Power Unit 2.6hp 2KW 1.3-3.6 gpm 1100-3200 psi optional valve mounting

3 HP, 5 Gallon vertical power unit with counterbalance valve assembly for lifting systems P/N HS-100102

3 Pin Solenoid Valve Electrical Connector DIN 46350 Form A 18mm with LED

Cable assembly for hydraulic single or double solenoid valve DIN 46350 Form A 18mm PUR polyurethane outdoor rated 12VDC 24VDC 110VAC or 220VAC

Coil Replacement for Hydraulic Solenoid Valve, 12VDC 24VDC 110VAC DIN and Deutsch connector

Counterbalance Valve Cartridge, 15 GPM 4060 psi, 3:1 ratio T-11A cavity

Counterbalance Valve D03 (NG6) module, 15 GPM 3000 psi, 3:1 ratio T-11A cavity

Counterbalance Valve Inline with Body, 3-Ports, 15 GPM 3000 psi, 3:1 ratio T-11A cavity SAE -8 O-ring ports

Counterbalance Valve Inline, 4-Port, 15 GPM, 3000PSI, T11A cavity

D02 (NG4): Hydraulic Electrical Solenoid Valve: 6.5 GPM 4560 psi 24VDC 3-Position

D03 (NG6): Check Valve Module: 9 gpm: 3045 psi

D03 (NG6): DIN Connector 2-Position Hydraulic Electric Solenoid Control Valve: 21 GPM: 4560 psi: 12VDC 24VDC 110VAC

D03 (NG6): DIN Connector 3 Position Hydraulic Electrical Solenoid Valve with manual override: 21 GPM: 4560 psi: 12VDC 24VDC 110VAC : 3-Position

D03 (NG6): DIN Connector 3 Position Hydraulic Electrical Solenoid Valve: 21 GPM: 4560 psi: 12VDC 24VDC 110VAC 220VAC: 3-Position

D03 (NG6): Duetsch Connector 3-Position Hydraulic Electrical Solenoid Valve: 21 GPM: 4560 psi: DT04-2P Connector

D03 (NG6): Flow Control Valve Module: 9 gpm: 3045 psi

D03 (NG6): Manual Lever Hydraulic Control Valve: 21 GPM: 4560 psi

D03 (NG6): Wiring Box 3-Position Hydraulic Electrical Solenoid Valve: 21 GPM: 4560 psi: 12VDC 24VDC 110VAC

D03 (NG6): Wiring Box 3-Position Hydraulic Electrical Solenoid Valve: 21 GPM: 4560 psi: 12VDC 24VDC 110VAC: Soft Shift (Balers and Compactors)

D05 (NG10): Check Valve Module: 18 gpm: 3045 psi

D05 (NG10): DIN Connector 3-Position Hydraulic Electrical Solenoid Control Valve: 31 GPM: 4560 psi: 110VAC 220VAC 12VDC 24VDC

D05 (NG10): Wiring Box 2-Position Hydraulic Electrical Solenoid Control Valve: 31 GPM: 4560 psi: 110VAC 220VAC 12VDC 24VDC: (Balers and Compactors)

D05 (NG10): Wiring Box 3-Position Hydraulic Electrical Solenoid Control Valve: 31 GPM: 4560 psi: 100VAC 220VAC 12VDC 24VDC: Soft Shift (Balers and Compactors)

Gear Pump, SAE AA mount CW or CCW Rotation 1.4-8cc/rev.

Gravity down valve SAE -6 ports flange mount directly to SCO power unit. Normally closed 110VAC

Hydraulic Cartridge Plug C10-2 Common Cavity

Hydraulic Direction Control Valve D08 (NG25), 131 GPM (500 LPM) 4500 PSI (315 Bar) Electically Operated

Hydraulic Flow Divider Combiner Valve, Inline, size 6 GPM 12GPM and 19GPM, 3626 PSI

Hydraulic Gear Motor or Pump 8 cc/rev (0.732 in3/rev) rear ports bi-direction SAE A mount

Hydraulic Gear Motor or Pump 8-26 cc/rev (0.732-1.58 in3/rev) 2-18gpm bi-direction SAE A mount

Hydraulic Gear Pump 14cc/rev (.854 cipr) 11 tooth shaft rear ported SAE A flange, CCW shaft rotation

Hydraulic Gear Pump SAE A flange CCW Rotation 4-28cc/rev (.24-1.7in3/rev), 2-18gpm 3625psi

Hydraulic Gear Pump SAE A flange CW Rotation 4-28cc/rev (.24-1.7in3/rev), 2-18gpm 3625psi

Hydraulic Gear Pump SAE B flange 55cc/rev (3.35 in3/rev), 40gpm at max speed 2900psi 13 Tooth Spline Shaft Rotation

Hydraulic Gear Pump SAE B flange CW and CCW Rotation 45cc/rev (2.78 in3/rev), 30gpm 3000psi

Hydraulic Gear Pump, Mini with Tang Shaft, 2.1 to 8cc/rev., 2320 to 3335 psi

Hydraulic High Performance Servo Proportional Valve with On Board Electronics, Size D03 (11gpm)