For a larger view of images, right click on the image and select "Open in a new tab"
Link to: Catalog
Soft shift valves shift 3-5 times slower than standard valves to reduce shock in the hydraulic system and reduce the in-rush current. The shift times are still fast enough to barely effect the machine performance.
Commonly used in balers and compactors.
Compare to: Nachi SS-G03-___-FR-E115-E….
- Terminal box with 1/2" conduit connection.
- D05 (NG10) Cetop mounting. Can be mounted to standard available subplates and bar manifolds.
- Maximum flow of 31 gpm
- Maximum working pressure = 4560psi (315 Bar)
- 3-position, 4-way, Spring centered, energize to shift
- Double solenoid operated
- Solenoid Power: DC= 35 watts, AC = 90VA (550VA inrush)
- Operating temperature = -22֯F to 174֯F
- Valve can be mounted in any direction
- NBR Buna seals
- Use with mineral based hydraulic fluid.
- Four fastening screws included, M6x40mm long
- White label with no logo for OEM manufacturers.
Options:
Solenoid Voltage: 12VDC, 24VDC, 110VAC (50 or 60 hz), 220VAC (50 or 60 hz)
Spool Configurations:
M: Motor spool, A and B ports to tank and P port blocked when centered.
Actuators will move freely from external forces when the valve is in the center position. Motors and cylinders will coast to a stop when centering. Adding an A&B port P.O. check valve under this valve will ensure a positive stop and hold the position of a motor and cylinder for longer durations.
T: Tandem Spool, A and B ports closed and P to T in center position:
Actuators will stop in center position and the supply pressure will be directed to tank. Commonly used with fixed displacement gear pumps so pressure can flow direct to tank and not build up heat by blowing across a relieve valve as would be needed with the M and C spool.
Mounting Pattern of mating surface (mm):
High volume OEM series production available per request.